HD-8870A Bending tester
The load bending testing machine is a special equipment for testing the bending fatigue strength of various power lines, connectors, wires, terminals, laptop power adapters, etc.This machine can measure six samples at the same time.This machine adopts PLC+ servo system + touch screen control, with the characteristics of accurate positioning and high precision.
The instrument conforms to iec 60884-1:2006, gb2099.1-2008, gb2099.3-2008 23.4 standard requirements of figure 21.
serial number | project | Parameters/specifications | |
1 | input power | 220VAC±10%，50/60Hz | |
2 | fuse | 10A/250VAC | |
3 | motor power | 1000W | |
4 | Bending speed | 3～60 TIME/MIN | |
4 | Bending Angle | ±10°～±1440° | |
5 | External maximum allowable load current | 1-20A | |
6 | External maximum allowable load voltage | <300VAC | |
7 | Number of bending | 0～999999TIME | |
8 | farmar | 50g, 100g, 200g, 300g, 500g | |
9 | size | 1300L*600D*1400H(mm) | |
10 | Test mode | Mechanical test/on-off test/load test | |
11 | Stop mode | Bad stop/full stop | |
12 | Rotation mode | Forward/reverse/continuous | |